Ask

Problems with the use of finger dexterity training instruments?

Answer

When using the finger dexterity trainer, you may encounter some problems. Here are some common problems and their possible solutions:

Improper operation: When using the finger dexterity training instrument for the first time, the training effect may be poor due to unfamiliarity with the operation. The way to solve this problem is to read the product manual carefully, follow the correct steps, and watch instructional videos or seek professional guidance when needed.

Inappropriate training intensity: If the selected training intensity is too high or too low, the expected training effect may not be achieved, and may even cause unnecessary pressure or injury to the fingers. Therefore, it is recommended to select the appropriate training intensity according to the individual's finger condition and training goals, and gradually adjust it during use.

Insufficient or too long training time: training time may not be effective exercise, and too long may cause finger fatigue or injury. Therefore, it is necessary to arrange the training time reasonably to ensure that the best training effect can be achieved in each training.

Equipment failure or improper maintenance: As an electronic device, the finger dexterity trainer may malfunction or performance degradation. In order to avoid this situation, it is recommended to maintain and maintain the equipment regularly, such as cleaning the equipment and replacing worn parts. At the same time, if the equipment fails, contact the after-sales service personnel for repair or replacement.

Personal psychological resistance: some users may be due to personal reasons (such as fear of pain, lack of patience, etc.) and the use of finger dexterity trainer. In response to this situation, it is recommended to adjust the mentality, recognize the importance of training, and try to overcome this resistance through self-motivation or sharing experience with others.

When using the finger dexterity trainer, if you encounter any problems, it is recommended to consult the product manual or contact the after-sales service personnel for help. At the same time, we should also maintain patience and perseverance, gradually adapt to and familiar with the training process, in order to achieve the best training effect.

Ask

The use method of air wave massager

Answer

The use of air wave massager is as follows:
Assess the patient's condition, understand the patient's physical condition, and explain the purpose of the operation to the patient and his family to ensure patient cooperation.
Turn on the power and turn on the power switch of the massager, the massager will start to inflate automatically.
Help the patient to take a comfortable lying position and connect the airway of the massager with the air pump.
Tie the pressure band of the generator to the patient's desired limb and connect the vent valve.
Start the massage and adjust the pressure of each chamber as needed. Massage time is generally 15~20 minutes, but can also be set according to their own needs.
During the massage process, the operation of the machine should be closely observed to ensure sufficient pressure and the normal operation of the instrument. At the same time, attention should also be paid to observe the temperature and color of the patient's lower limb skin. If there is pain or other discomfort, it may indicate the formation of deep venous thrombosis (DVT) of the lower limbs, and the air pressure treatment should be stopped in time.
In the elderly and in patients with poor elasticity of blood vessels, treatment should begin with low values and gradually increase the pressure after a few days.
After the treatment, first turn off the instrument switch, then pull out the power supply, and separate the ventilation tube.
Remove the pressure belt and observe the patient's skin to ensure that there is no damage after finishing the bed unit. After that, the air sac was disinfected using 75% ethanol wipe to prevent cross infection.
Please note that when using the air wave massager, make sure that the body is not coated with lubricating oil, perfume and other oily items, so as not to affect the massage effect. At the same time, do not use in high temperature environment or direct sunlight. In addition, the time and frequency of massage should be moderate, and excessive massage is not recommended. If the body is abnormal, stop using it in time.
Finally, the specific method of use may vary depending on the product model and brand. Therefore, you should read the product manual carefully before use and follow the manufacturer's recommendations and instructions. In case of any doubt or discomfort, it is recommended to consult a doctor or professional.

Ask

What are the precautions for the upper limb coordination function trainer?

Answer

The upper limb coordination function trainer is a kind of rehabilitation equipment specially used to improve the stability and coordination of upper limbs. It helps users to carry out targeted upper limb training by designing specific movements and resistances to improve the mobility of the upper limbs and promote the recovery of muscle strength and flexibility.

When using the upper limb coordination function trainer, the user needs to adjust the parameters of the device according to his personal situation, such as resistance level, exercise speed, etc., to ensure the safety and effectiveness of the training. During the training process, users need to perform actions such as pushing and pulling, rotating, etc., to simulate upper limb activities in daily life, and gradually improve the stability and coordination of the upper limbs through repeated exercises.

This kind of training device plays an important role in rehabilitation medicine, especially for patients with dysfunction caused by upper limb injury or disease, the use of upper limb coordination function training device can help them restore the upper limb exercise ability and improve the quality of life. In addition, for patients who are bedridden for a long time or lack of exercise, the upper limb coordination function trainer can also help them avoid complications, such as pressure ulcers and deep vein thrombosis.

In general, the upper limb coordination training device is an effective and practical rehabilitation equipment, which can help patients recover the function and activity of the upper limb and improve the quality of life. However, when using, patients need to be under the guidance of a doctor to ensure the safety and effectiveness of the training. At the same time, patients also need to maintain patience and perseverance, gradually adapt to the training process, in order to achieve the best rehabilitation effect.

Ask

What are the flexible finger training instruments?

Answer

There are many kinds of finger flexible training instruments, and their design principles and uses are different, but they are all designed to help users improve the flexibility and coordination of fingers. Here are some common finger flexibility training instruments:
Finger rehabilitation training device: This type of training device is mainly used to train finger joint adhesion, through a series of flexion and extension movements, to help restore the normal range of activities of the fingers.
Finger: Finger is mainly used to improve the grip and flexibility of the fingers. By gradually increasing the resistance, the user can gradually increase the strength of the finger muscles during daily exercises.
Finger finger board: This type of trainer is mainly used for finger training of hemiplegic patients to help the patient's fingers separate and move independently, thereby improving the flexibility and independence of the fingers.
Piano Finger Trainers and Guitar Finger Trainers: These trainers are designed for specific instruments and are designed to help practitioners improve the strength, flexibility and coordination of their fingers.
Massage health ball: suitable for the elderly, through continuous rolling, massage, can train the flexibility of the fingers, and promote the blood circulation of the hands.
Finger coordination function trainer: This type of trainer is mainly used to train upper limb stability and coordination function, and helps users to carry out targeted finger training by designing specific movements and resistance.
Please note that these are just some common products on the market, and the specific choice should be made according to individual needs and circumstances. Before using any finger dexterity training instrument, it is recommended to consult the advice of a doctor or professional physiotherapist to ensure the safety and effectiveness of the training. At the same time, we should also pay attention to choosing regular brands and channels to ensure the quality and effect of products.

< 1 >